Contact information

[ Dry system FBH costs per m² ] Dry system underfloor heating without screed - costs
[ Dry system - underfloor heating without screed costs ]

Dry system underfloor heating costs

Full cost control - thin layer underfloor heating system 

You have decided on the energetic renovation of your property and would like to carry it out in the shortest possible time? This is possible with a dry system underfloor heating! Thanks to the low installation height of just a few centimeters, the particularly quick installation and the low dead weight, the dry system is a good choice for the renovation of old buildings, but can also be used in new buildings without any problems.

Underfloor heating dry system price at a glance

As specialists in underfloor heating with decades of experience, we know exactly which heating system is best suited for your property. The underfloor heating in the dry system is particularly characterized by the following properties:

  • Low construction height from 30 mm
  • Light weight
  • Particularly fast installation
  • Rapid heating at the touch of a button
  • Very good thermal insulation thanks to XPS panels
  • Reflective surface for better heat distribution

The structure of the FBH is based on dry system panels with integrated diffusion-tight heating pipes. Since it is laid without screed, the dry system underfloor heating scores with a particularly low dead weight. This property is essential for laying in existing buildings with beamed ceilings, as the statics of the house are not disturbed.

[ Dry system FBH costs per m² ]

Dry system underfloor heating costs at a glance

Dry system FBH from 50 m²

250 €

per m²

  • Wall and floor breakthrough
    • Attach and connect the distributor
      • Installation of supply line
        • Pump group for underfloor heating
          • Connection to the heating system
            • Level and prepare the subfloor
              • Drywall XPS panels for the FBH
              • Edge insulation strips made of PE foam
              • Installation of the aluminum composite pipes
              • Underfloor heating control
              • Hydraulic balancing
go to the offer
Dry system FBH from 150 m²

200 €

to 150 m²

  • Wall and floor breakthrough
    • Attach and connect the distributor
      • Installation of supply line
        • Pump group for underfloor heating
          • Connection to the heating system
            • Level and prepare the subfloor
              • Drywall XPS panels for the FBH
              • Edge insulation strips made of PE foam
              • Installation of the aluminum composite pipes
              • Underfloor heating control
              • Hydraulic balancing
go to the offer
Quality

"Best material quality."

Reliability

"In the right place at the right time"

Professionalism

"Wide range of services."

Installation and maintenance of a dry system underfloor heating

An FBH with dry system panels is laid directly under the floor covering and does not require a layer of screed. To do this, the XPS panels are laid, connected to one another and connected to the electrical network. The installation itself usually takes a few days and is done quietly and without dust.

Although the installation of a dry system underfloor heating is quick, you should contact a specialist tradesman. Since wooden beam ceilings have a higher movement intensity, thorough planning and professional installation are required. This is the only way to ensure the efficiency and longevity of your new FBH. We have specialized in laying underfloor heating and have been inspiring builders with our skills for over 30 years.

Save money with thin-layer underfloor heating

Above all, you save money if you have the thin-layer underfloor heating installed by a professional. Thanks to decades of experience, we know exactly what to look out for during installation and can guarantee you the best possible results.

Contact us today and let us make you a non-binding complete offer for your underfloor heating!

Thin layer underfloor heating with dry system

Underfloor heating with a dry system is one of the thin-layer underfloor heating systems because it has a low installation height. This makes it particularly suitable for the renovation and upgrading of old buildings. While a conventional underfloor heating built into the screed layer is heavy, the FBH in the dry system can even be installed on a wooden beam ceiling. The installation takes place within a few days with minimal dirt formation, as only the drywall panels are laid and no further floor work is required. Due to the special construction, even expansion joints are only necessary from an area of ​​200 square meters, which shortens the installation time.

The price for the thin-layer underfloor heating in the dry system in the reasonable range .... €. This includes all necessary installation work.

A specialist company with over 30 years of experience ensures the best results

Benefit from the knowledge of a specialist company with decades of experience and realize your desire for a modern, comfortable home in no time at all. A dry system underfloor heating has a positive effect on the room climate and is even suitable for allergy sufferers due to the lack of air turbulence. The gentle warmth comes closest to a pleasant sunbath and conjures up a pleasant atmosphere in every room!

Contact our specialist consultants and get a non-binding offer. It goes without saying that our tailor-made offers are fixed prices. So you don't have to reckon with a subsequent increase in costs and can devote yourself entirely to enjoying your new dry system underfloor heating. We look forward to your call!

[ FAQs ]

Frequently Asked Questions

Can a dry system underfloor heating be installed in an old building?

Installation in old buildings is the most common type of use for dry system underfloor heating. Thanks to its low dead weight and low installation height, the FBH is even suitable for laying on a wooden beam ceiling. You too can benefit from the health-promoting, cost-saving properties of a dry system underfloor heating - just talk to us!

Which floor covering can be laid on a dry system underfloor heating?

All floor coverings are suitable for laying on an FBH. However, we recommend switching to coverings that support the flow of heat as much as possible. We would be happy to recommend suitable floor coverings for your individual living situation and install them on request.

How long does it take to install dry floor heating?

The laying is usually completed within a few days, as there is no drying time for the screed. This means that the dry system underfloor heating is installed quickly and without dirt, so that you and your family have practically no downtime to worry about.