Contact information

[Costs & Prices] Milling underfloor heating costs & prices More about that

“Our quality speaks for itself. But our customers speak even louder. See what they have to say.”

Experiences & ratings for We lay screed
[Costs & prices for subsequent installation]

Floor heating mill costs

Cozy warmth with economical energy - we would be happy to upgrade this comfort for you by adding a Floor heating milling into your existing ones. Many house and apartment owners are pleasantly surprised at how easily the surface heating fits into the existing screed. Families often save a lot of money with this decision, since underfloor heating is energy-saving and economical thanks to its low flow temperature.

Underfloor heating for retrofitting - for small rooms and large areas

Our screed company attaches great importance to quality, openness and customer service. We have been providing our satisfied customers with this recipe for more than 35 years. Our many years of experience and the use of modern methods allow us to make tough calculations and offer you a clear and fair price for underfloor heating milling.

We have the right offer for every size of your living space. Whether you want to provide a small bathroom with cozy warmth from below or equip your entire apartment with this convenience - with us you pay a price for milling floors that you can rely on.

[ Milling underfloor heating costs per square meter ]

cost per square meter

Quality

"Best material quality."

Reliability

"In the right place at the right time"

Professionalism

"Wide range of services."

[Costs for the complete installation]

Milling underfloor heating - costs & prices

up to 100 sqm

8000

up to 100 m2

  • heat load calculation
  • Wall and floor breakthrough
  • Attaching the distributors
  • Installation of supply line
  • Pump group for underfloor heating
  • milling the grooves
  • Laying the aluminum composite pipe
  • 1. Pressure test
  • Closing the grooves
  • 2. Pressure test
  • Hydraulic balancing
Get an offer
up to 200 sqm

12000

up to 200 m2

  • heat load calculation
  • Wall and floor breakthrough
  • Attaching the distributors
  • Installation of supply line
  • Pump group for underfloor heating
  • milling the grooves
  • Laying the aluminum composite pipe
  • 1. Pressure test
  • Closing the grooves
  • 2. Pressure test
  • Hydraulic balancing
Get an offer
[ How does it work? ]

This is how we proceed when milling your underfloor heating

As soon as you have made an appointment with us for an assessment, we will come to you to look at your existing floor. If your screed is at least 35-40 mm thick, laid according to standards, smooth and hardened, then you can get started. The process used by our screed company has been tried and tested for decades and allows underfloor heating to be successfully retrofitted even in old buildings. Our employees will carry out the following steps for you:

  1. Heating load calculation: To determine the exact requirements of your rooms.
  2. Soil test: We check whether your screed is 35-40 mm thick, conforms to standards and is suitable.
  3. Wall and floor breakthrough: For the necessary installation.
  4. Milling the grooves: Here we lay the tracks for your heating pipes.
  5. Laying the aluminum composite pipe: Into the freshly milled grooves.
  6. Attaching and connecting the distributors: For efficient heat distribution.
  7. Pump group for underfloor heating: Ensures optimal operation.
  8. 1. Pressure test: Ensuring quality and tightness.
  9. Clean closing of the grooves: For a flawless finish.
  10. 2. Pressure test: Double control for your safety.
  11. Hydraulic balancing: For even heat distribution.

After a thorough final check, we will hand over your new underfloor heating to you. You can then apply your planned floor covering immediately without further waiting or start laying your tiles in the bathroom. Milling underfloor heating saves you money and gives you a completely new, pleasant feeling of warmth in your familiar surroundings.

Additional costs for the milling system

  1. storey: The more floors your building has, the more it may cost because more materials and labor are required.

  2. Underfloor heating control: Different control systems have different prices. More advanced systems might cost more but may save energy.

  3. Laying distance: The distance between heating tubes affects how much material you need and how evenly the room is heated. A closer spacing may cost more but provides even heat.

[Offer from a qualified screed layer]

Your digital offer in four steps

  • 01
    Requirements assessment

  • 02
    Automatic calculation

  • 03
    Transparent offer

  • 04
    Project preparation

[ Reinstall ]

Underfloor heating costs

If the milling process cannot be implemented due to special structural conditions, a completely new installation of the underfloor heating can be considered. Such an installation ensures that you reap the benefits of an efficient heating solution. The information below provides a clear breakdown of the costs for such a new installation and the accompanying screed.

Transparent cost overview

A clear presentation of costs is important to us. With us you get detailed insights into the pricing structure without hidden fees.

[The modern floor covering]

screed costs

Contemporary interior design loves naturalness and elegance. Exposed screed, made from high-quality cement screed, embodies this trend - it combines minimalist beauty with reliability. It not only enriches the look, but also provides a solid and long-lasting foundation. Be inspired by how this floor covering can refine your living space and find out about its economic advantages.

Transparent costs

Experience the modern aesthetics of exposed screed, where design meets affordable price.

[ Efficient heating solutions with experience ]

35 years of experience on your side

Our customers have been expressing their trust in us for more than three decades. One call is enough and we will come by to mill your underfloor heating, lay your screed or take on other tiling, demolition and insulation work for new construction, conversion or renovation. We help you to keep the costs clear and manageable. Many of our regular customers are so satisfied with us that they not only recommend us to their friends, but also to their own offspring. This fills us with pride and joy.

We would like to convince you with our customer service and professional competence. Allow us to mill your underfloor heating. We make the costs transparent and fair for you, so that you can see right away how quickly the small price pays off through savings on your heating bill. Fill out our contact form today and you can look forward to your new underfloor heating soon.

[ FAQs ]

Do you have anymore questions?

Do you also connect the underfloor heating?

Yes, after we have laid out the aluminum composite pipes, we will install and connect all the distributors for you.

Do you deliver everything ready to go?

Yes, our offer to mill your floor at a finished price includes everything, including travel, material, connection of the distributors, expert sealing of the grooves up to delivery of your new underfloor heating..

Which heating pipes do you use?

We use high-quality aluminum composite pipes that are resistant to aging and diffusion-tight. These pipes have proven themselves over many years of practice and protect your heating system.

When can I start heating up the new underfloor heating?

If we mill your underfloor heating and install it in your existing screed, you can immediately lay the floor and start heating.

Can I retrofit a single room with underfloor heating?

Yes, even if you only want to equip a single bathroom or your living room with energy-saving panel heating, you've come to the right place. The big advantage of our method is that you can put your floor covering back on straight away. Your home is immediately fully usable again.

Can I get an individual offer from you?

We would be happy to work out a personal offer for you. Please simply state your wishes in the contact form and we will get back to you as soon as possible.

When will you be with me to mill the underfloor heating?

We have a very short lead time. We will be with you at the agreed time, typically within five days of your order.

Do you also lay underfloor heating in new buildings?

We would also be happy to take over the laying of your underfloor heating with the associated screed for your new building project. Please simply tell us how big the planned area is and we will make you a convincing offer.

When can you come over?

After your order, we will be with you within 5-7 days and lay your screed.

Your dream floor starts here

High-quality screed solutions that make the difference. Contact us now!