Industrial floor
RHEOBOND 007 / 008 - high-strength industrial flooring for new construction and renovation
Only 10 millimetres thin and fully loadable after 48 hours - the hard-wearing industrial flooring RHEOBOND 007 / 008 offers you tangible benefits. Choose this heavy-duty, low-shrinkage industrial flooring for new builds in high-traffic production areas, for the time-critical refurbishment of logistics halls or as a durable exposed screed for your home.
The strengths of RHEOBOND 007 / 008 industrial flooring
An industrial floor is exposed to greater stress than conventional floors. Countless forklift truck journeys, spontaneous point loads and permanent truck deliveries demand maximum performance from your industrial floor. RHEOBOND 007 / 008, the heavy-duty industrial floor covering that hardens without shrinkage or tension, shows its strengths on surfaces subject to high mechanical loads.
As a thin-layer special cement, the industrial flooring bonds permanently with freshly laid or adhesion-sealed concrete. This makes RHEOBOND 007 / 008 the ideal partner for the rapid commissioning of new logistics areas or the refurbishment of your production environment. Extensive warehouses and large living areas also benefit from the possibilities of a seamlessly laid floor.
Rapid commissioning of new areas
Time is money. By using RHEOBOND 007 / 008 as an industrial floor, your new logistics areas, production halls or driveways will be ready for use immediately. As a purely mineral and therefore fire-resistant industrial floor covering, it can withstand even heavy loads with ease. The thin-layer industrial floor forms a strong bond with the still damp concrete and hardens quickly and stress-free.
You can give wide, uniform surfaces a homogeneous appearance by laying them without joints. This also makes the industrial floor covering extremely interesting as a visible screed. Exhibition halls, packing stations and high-quality residential complexes are transformed within hours into lush usable areas with a pleasant appearance, high load-bearing capacity and excellent resistance to mechanical stress.
Industrial floor refurbishment in record time
Don't put off urgently needed renovations any longer. If ruts or other damage appear on your existing commercial flooring after years of intensive use, then it's time to repair your industrial flooring. You can avoid unnecessary downtime when renovating your driveways, logistics halls or goods receiving areas. By using RHEOBOND 007 / 008 for your renovation, we reduce your downtimes to a minimum.
The polymer-modified exposed screed hardens quickly and stress-free, and the finished surfaces are ready for use again within 48 hours. RHEOBOND 007 / 008 achieves a compressive strength of 40 N/mm² after just the first day and reaches its full compressive strength of 60 N/mm² after 28 days.
Exquisite exposed screed for seamless living dreams
Give your living space visual depth and look forward to your seamless exposed screed. The RHEOBOND 007 / 008 industrial floor covering we use forms a firm bond with the concrete floor and is shrinkage-free. Apart from the building-related expansion joints, your exposed screed therefore requires no additional levelling joints. You get a uniform surface free of visual restrictions.
The thin installation height of just 10 millimeters also allows for completely new living ideas. Especially when laid as an attractive exposed screed, you save yourself the need for any additional floor covering. You gain room height and expand your usable living space. Perhaps you would also like to set up a private dance hall in your home. The hard-wearing floor is also ideal for this and you will enjoy it for years to come.
Properties and advantages of RHEOBOND 007 /008
The high-quality industrial floor covering RHEOBOND 007 / 008 is suitable for large-area applications and areas subject to high mechanical loads. As a non-shrink and stress-free visible screed, it is also characterized by its fast drying time, ideal for short downtimes in a commercial environment. The polymer-modified industrial floor RHEOBOND 007 / 008 is
- purely mineral and fireproof
- Firmly bonded to the substrate
- Hardens without shrinkage and tension
- Hardened with crystal quartz aggregates
- Fully loadable after just 48 hours
- has a compressive strength of 60 N/mm²
- Can be laid with a thickness of 10 millimeters
With this high-quality industrial floor covering, we provide you with all the advantages of modern screed technology.
Procedure on site
Our screed layers will be on site at the agreed time to lay the RHEOBOND 007 / 008 industrial floor covering. We start by pre-wetting and applying the system bonding bridge. We then lay the industrial flooring, which forms a durable bond with the floor with the help of the polymer-modified bonding agent.
If necessary, we cover the fresh floor after machine smoothing to ensure sufficient hydration. The next day, we complete the installation by applying the appropriate glaze. Your industrial floor or exclusive exposed screed is ready for use on the same day. Look forward to your elegant and indestructible industrial floor covering.
Your experienced partner for your industrial floor
For more than 35 years, we have been enthusiastically winning over customers and partners through quality, reliability and the will to innovate. During our ongoing training, we are constantly coming across new, interesting and innovative exposed screed options. The highly tempered industrial floor RHEOBOND 007 / 008 convinced us with its many useful properties.
We are pleased to be able to offer you this attractive, durable and environmentally friendly exposed screed, which you can walk on and make full use of just two days after installation. Contact our friendly customer service team today to arrange a date for us to lay this high-strength industrial flooring for you.